|
Preamplificatore di fascia alta , ottimo
per impianti anche a due canali , con una sezione apposita hi-end.
Entrate RCA e Bilanciate, uscite RCA e XLR , ottimo convertitore
interno , sintonizzatore e connessioni HDMI.
Dal sito ufficiale:
-
Dolby Digital EX, DTS ES, DTS 24/96 & Dolby Pro Logic IIx decoding
-
2-way HDMI switching
-
balanced audio outputs
-
HDTV compatible component / RGB switching
-
composite and S-video up conversion to component or RGB
-
2nd zone output with audio and video
-
2-way RS232 control port
-
RDS tuner on board
-
audiophile sound quality for movies and music
The
AVP700 builds on Arcam’s impressive history and together with its natural
partner, the new P1000 power amp, allows a truly spectacular multi channel
sound system to be created. Drawing heavily on the design work of the
world-renowned FMJ AV8 processor, the AVP700 offers the intensive feature
set demanded by AV enthusiasts and custom installers alike. Video format
up-conversion, HDMI digital video switching and full duplex RS232 allow
the AVP700 to simplify typical home systems and integrate into the most
complex installs. World-class audio processing within the AVP700 delivers
a sound quality that will enthrall even the most discerning listeners
regardless of the source material or decoding mode required.
The
AVP700 Was designed in the UK and available in black or silver finish.
Analogue audio
-
Audiophile quality components for best sound quality, including 1% metal
film resistors, polypropylene film capacitors, OSCON electrolytic
capacitors & double sided, through-plated fiberglass circuit boards
-
Balanced & Unbalanced pre amp outputs for all 7 channels and subwoofer
-
Multi-channel 7.1 analogue input for DVD-A or SACD sources
-
Stereo direct switch bypasses and disables all digital processing for 2
channel analogue sources
-
7
stereo analogue inputs (plus tuner); 3 tape outputs (one a tape loop)
-
Zone 2 stereo audio, from stereo analogue inputs or internal tuner.
Source and volume control independent from main outputs
-
Built in FM/AM RDS stereo tuner with 30 FM and 16 AM presets
Digital audio
-
State of the art Crystal Semiconductors CS49400 DSP, with 24-bit fixed
point double precision Dolby Digital and DTS decoding and 32-bit fixed
point double precision bass management. 4 layer PCBs
-
Wolfson Microelectronics 24-bit 192kHz DACs, stereo ADC and precision
electronic volume controls
-
Decodes Dolby Digital EX, Dolby Pro Logic IIx (including full music mode
support), DTS 96/24, DTS-ES Discrete and Matrix 6.1, DTS Neo 6
-
6
Arcam-optimized surround effects modes for 2 channel sources
-
Adjustable crossover switching from 40 – 130 Hz in 10 Hz steps
-
Separate sub woofer level settings for film and stereo listening
-
Bass and treble equalizers, both global and for each of 7 main channels
-
6
fully assignable digital inputs, 3 co-axial, 3 optical; 1 coaxial & 1
optical output
-
Assignable global audio delay, adjustable from 0 – 220 milliseconds, to
compensate for video processing delays in digital displays or DVD
players
Video
-
2-way HDMI switching, HDCP compatible
-
5
composite and 5 S-video inputs; 3 fully buffered outputs of each type
-
3x
HDTV compatible component video inputs and 1 monitor output (these may
alternatively be configured to support RGB, with sync on composite
video, for use in European TV systems
-
Video up conversion – composite to S-video and vice versa via the
monitor outputs; composite and S-video to interlaced component video
-
Video up conversion to RGB with sync on composite (SCART compatible) for
European TV displays. 12V triggers support S-video, RGB and widescreen
switching for SCART equipped TVs.
-
Composite and S-video inputs assignable to “non video” audio inputs
-
High quality (component / RGB) inputs each assignable to any audio input
-
Zone 2 composite video output, from composite video inputs
Custom install features
-
Independent Zone 2 (audio + video), with fixed/variable volume &
parental access control to sources
-
Duplex RS-232 control; also suitable for system software updates
-
RC-5 remote input jacks for both zones
-
IR
pass through for source components
-
Full suite of discrete IR RC-5 codes, including separate on / off etc
-
12
Volt triggers, on/off for zones 1 and 2 and either SCART control (video
in RGB mode) or on / off and video signal sensing (component video mode)
General
-
Supplied with back-lit CR80 learning remote control with support for up
to 7 other components
-
Large, clear 12 character dimmable VFD front panel display
-
Ground lift switch ; User switchable between 120 and 230 Volt mains
supplies
-
Size – 430mm wide, 433mm deep, 145mm high
http://www.arcam.co.uk/advice-and-support/discontinued-products/AVP700AVProcessor
|
