|
Se interessati prezzo promozionale
visto che sono all'inizio 3900 € la coppia
|
Recommended amplifier power |
30 -150 Watts |
|
Continuous power handling |
95 Watts RMS |
|
Frequency response |
39Hz - 25kHz -6dB |
|
Sensitivity |
91dB (2.83 Volts @1 metre) |
|
Nominal impedance |
8 Ohms |
|
DRIVE UNITS |
|
Dual Concentric™ high
frequency |
25mm (1.00”) aluminium alloy dome with
Tulip Waveguide™ |
|
Dual Concentric™ low frequency |
250mm (10.00") treated paper pulp cone
with HE twin roll fabric surround. 42mm (15/8") edge wound voice
coil |
|
Dispersion |
90 degrees conical |
|
CROSSOVER |
|
Frequency |
1.8kHz |
|
Type |
Bi-wired, hard wired passive, low loss
2nd order compensated LF, 2nd order HF |
|
Adjustment |
+/- 3dB over 1.8 kHz to 25 kHz
shelving |
|
CONSTRUCTION |
|
Enclosure type |
Distributed Port |
|
Volume |
85L (3 cu.ft) |
|
Dimensions |
850 x 397 x 368mm
(33.50 x 15.50 x 14.50”) |
|
Weight |
23kg (50.7 lbs) |
|
Finish |
Walnut veneer with solid walnut edging
and trim detail |
Un pezzo di storia della riproduzione
musicale , diffusori che montano il famoso altoparlante concentrico , in
questo caso da 25 cm con sospensione in carta e con la possibilità
di regolare, tramite un favoloso e classicissimo selettore ,
l'efficienza del tweeter , con 5 posizioni. La
finitura e favolosa , completamente in legno sono delle piccole opere
d'arte . La griglia anteriore e robustissima con
la particolarità di avere una serratura per poterla estrarre.
Le dimensioni sono contenute e sono di facile posizionamento.
Dal sito ufficiale:
http://www.tannoy-speakers.com/s.php?product=132&title=Stirling+SE&s=27
A compact floor-standing speaker that uses
a 10.00” Tannoy Dual Concentric™ in a cabinet design optimised to
produce bass performance with superb control and extension, allied to
spacious, fluid mid-range and high frequencies of great purity and
detail. The cohesion of the stereo sound staging reproduced by the
Stirling SE, a characteristic common to all the Dual Concentric™
equipped Prestige models, is involving and believable, delivering
remarkable spaciousness and presentational stability in equal measure.
All components and cabinets are still hand
assembled in the time-honoured fashion to ensure that attention to
detail and unique styling go hand in hand in maintaining the exclusive
appeal of this highly respected and sought after loudspeaker.
The design comfortably complements any
decor from ancient castle through to the cool, casual and contemporary.
The only rules we absolutely adhere to when designing and crafting
Prestige loudspeakers is to utilise the most up to date, no compromise,
acoustic technologies and time-proven cabinet making skills ensuring
these are probably the very best sounding loudspeakers you will find …anywhere.
Having re-evaluated the performance of
models throughout the Prestige range, Tannoy engineers selected the
latest cutting edge components and materials at their disposal to
introduce several performance enhancing amendments to the crossover
topologies within the ‘SE’ models. To optimise acoustic performance only
components of the highest possible standard have been used.
Hard-wired crossovers are used throughout
the Stirling SE and the routing of each cable has been painstakingly
considered to ensure there is no degradation in sound quality. Similarly,
the components have been carefully arranged to avoid any coupling
effects. In particular, incredible transparency in the mid band has been
achieved providing an enhanced true-to-life vocal clarity. Completely
redesigned crossovers, incorporating the most up-to-date high quality
components, have taken these models to a new level of acoustic
excellence. ICW Clarity Caps have been included for high frequency (HF)
section of the crossovers, while high quality metalised film capacitors
are used in LF sections. The LF crossover also makes use of very low
loss laminated iron core inductors. Internal connections from input
terminals to crossover, internal crossover wiring and crossover to Dual
Concentric™ drive unit are made with the exceptional VDH MC CS18 halogen
free silver-plated cable.
A 5-point terminal panel (bi-wire and
ground point) gold plated terminals has been incorporated on the
Stirling SE. With the driver chassis grounded via the 5th terminal, and
by using appropriate speaker cable, this proven technology, developed on
earlier Prestige models, minimises the effects of RF interference
resulting in a more transparent midrange




il dettaglio del filtro regolabile

La serratura per i pannelli paracolpi




Oltre alle istruzioni troviamo una
confezione di cera adatta a queste meraviglie

Nella confezione troviamo anche
la serie dei piedi sia piatti snodabili che le punte

Vi consiglio di leggere la recensione
che trovate sotto , fatta da persone molto più qualificate di me ,
comunque vi spiego le mie sensazioni : Facili da posizionare
e anche da pilotare , si rivelano subito diffusori dal carattere
personale , un basso sicuramente non soffiato ma piuttosto
asciutto e veloce , da la sensazione di partire piuttosto in alto
, ma non pensate male , i bassi ci sono tranquilli.
Sono sicuramente diffusori da ascoltare alcune volte prima
di giudicare bene , hanno un suono sofisticato e dettagliato e la
riproduzione e i progettisti hanno ricercato un suono il più
possibile vicino all'originale. Insomma questi diffusori
hanno la caratteristica di istruire l'ascoltatore ad un
corretto ascolto e io appena posso li ascolto per
farmi una cultura musicale.

La recensione di FdS


|