|
Caratteristiche Tecniche :
E-MU's PS12
Precision Subwoofer features a premium 12"" driver and custom discrete
200 watt MOSFET amplifier in a compact, sealed cabinet design to deliver
superior transient response and low distortion. From nuanced acoustic
performances to extreme club mixes, the PS12 delivers linear frequency
response down to 22Hz. Whether used in conjunction with E-MU's PM5
Precision Monitors or other speakers, the PS12 is perfect for both
stereo and surround applications with professional features like
balanced/unbalanced inputs and outputs; high-pass, low-pass and subsonic
filters; variable level and phase controls; overload protection; and a
footswitch input that allows effortless bypassing of the subwoofer and
high-pass filter during mixdown.
|
General :
- Type: front firing, acoustic suspension
active reference subwoofer
- Frequency Response: 22Hz~135Hz (±2.5dB),
30Hz - 100Hz (±1.5dB)
- Maximum Sound Pressure Level, short term:
=103dB SPL @1m @ 60Hz
- Driver:
- Polymer-Laminated Cone with Butyl-rubber
surround
- Long-throw with high temperature voice coil
- Size: 305mm (12"")
- Dimensions:
- Height: 385mm (15.1"")
- Width: 362mm (14.2"")
- Depth: 390mm (15.3"")
- Weight: 19.5kg (43lbs)
- Power:
- Input Voltage: 100V-120V~50/60Hz Input
Current: 2.5A
- Input Voltage: 220V-240V~50/60Hz Input
Current: 1.25A
- Auto power-On/Standby (15-minute standby
delay)
- Fuse:
- 100-120V: 2.5A/250V
- 220-240V: 1.25A/250V
|
Connections:
- (2) Balanced Neutrik® Combination XLR/TRS
Inputs
- (2) Unbalanced RCA Inputs
- (2) Balanced XLR Satellite Outputs
- (2) Unbalanced RCA Satellite Outputs
- (1) 3-pin power connector
- (1) Subwoofer/Hi-Pass Filter Bypass
Footswitch Input(Foot Switch not included)
Crossover Network :
- Sub-Sonic Rumble filter: 15Hz @ 12dB/octave
- Low-Pass Filter(to subwoofer): Variable
frequency Linkwitz-Riley 4th order (55Hz~135)
- Hi-Pass Filter(to satellite outputs):
Variable frequency Linkwitz-Riley 2nd order (40Hz~135Hz)
- Input Impedance
- Balanced: 20KOhms
- Unbalanced: 100KOhms
Amplifier:
- Type: custom discrete MOSFET
- Power: 200W RMS into 4 ohms continuous
- Signal-to-Noise Ratio, referred to full
output: >102dB A-weighted
- Distortion: THD <0.1% |
Subwoofer professionale davvero notevole , tutte le regolazioni
immaginabili , uscite XLR - RCA , filtro subsonico , regolazione
taglio e uscita RCA per diffusori per medio alti gia' tagliati.
Sospensione pneumatica , con woofer da 305 mm di diametro e
amplificatore 200 watt.
Ultimamente mi
sono innamorato dei prodotti professionali , altissime prestazioni
a costi tutto sommato ragionevoli. Questo prodotto e una
bomba.
Il sito ufficiale :
http://www.emu.com
Il manuale:
http://www.emu.com/support/files/storage/PS12%20Owner's%20Manual%20All%20Lang.pdf
|
Audiocostruzioni e
punto vendita di : |
 
|
