Recensioni e Schede      

Integrato Nad 3130

 

 

Di cosa si tratta

Integrato

L'importanza di iscrivervi alla newsletter

Produttore

Nad

Caratteristiche

30 watt entrata phono

 Costo

-

 

Caratteristiche:

 

PRE-AMP SECTION

Phono input

Input impedance (R and C)                                                                     47k/ 100pF

Input sensitivity, 1kHz                                                            MM 2.5mV ref. 0.5V      

                                                                                      MC 200µV

Signal/Noise ratio (A-weighted with cartridge connect                      MM 76dB ref. 5mV

                                                                                                   MC 76dB ref. 0.5mV

RIAA response accuracy (20Hz - 20kHz)                                                          ±0.5dB

Line level inputs

Input impedance (R and C)                                                                              100pF

Input sensitivity (ref. 1W)                                                                                 150mV

Maximum input signal                                                                                       >10V

Signal/Noise ratio (A-weighted ref 1W)                                                                85dB

Frequency response                                                                20Hz - 20kHz / ±0.5dB

 

Tone controls

Treble                                                                                                ±7dB at 10kHz

Bass                                                                                                 ±7dB at 100Hz

 

POWER AMP SECTION

 

Continuous output power into 8 *                                                       30W (1 5dBW)

Rated distortion (THD 20Hz - 20kHz)                                                              0.03%

Clipping power (maximum continuous power per channel)                                    45W

IHF Dynamic headroom at 8                                                                            +3dB

I H F dynamic power (maximum short term power per channel)                8         60W

 

Input impedance                                                                                               22k

Input sensitivity (for rated power into 8 )                                                          850mV

 

PHYSICAL SPECIFICATIONS

 

Dimensions (W x H x D)                                             420 x 108 x 381 mm

Net weight                                                                                                      6.9k

Shipping weight                                                                                              8.2kg

    Power consumption (120 ~ 240V, 50/60Hz)                                        240 VA

 

Scheda fotografica:

 

 

 

 

Vediamo dietro:

 

 

 

Dal sito ufficiale:

 

NAD amplifiers are noted for transparent musicality, solid speaker-driving power, and economical no-frills design. The NAD 3130 stereo amplifier, while rated at a modest 30 watts per channel, has a high­current output stage that delivers short-term bursts of 60 to 80 W/ch, not only at 8 ohms but also with the complex impedances of real loudspeakers.

NAD amplifiers are also exceptionally free of noise and distortion at low volume levels. The 31 30’s

phono and tone control circuits are quieter than those in many separate preamplifiers. Every detail of the recorded soundstage is transparently reproduced, with no veil of low-level hiss.

You may have heard that you need a large and costly amplifier to reproduce digital Compact Discs without distortion. Listen to CDs through the 3130 and discover for yourself the audible difference between rated 8-ohm out-put and real speaker-driving power. The 3130 amplifier and NAD 30 speakers comprise the lowest-cost system that does full justice to the wide frequency range and dynamic range of the CD.

 

Hit Counter

Home