|
Caratteristiche:
|
 |
Frequency Range DC –
200kHz
Noise Distortion <0.001%
Intermodulation <0.002%
Input Sensitivity 470mV
Signal to Noise 102/106dB, 500mV/25
Channel separation 90dB
Rated Power 120W (8) 200W (4) 380W (2)
Output Voltage 31V average 80V peak to peak
Unweighted signal-to-noise ratio 102dB
S/N ratio 112dB
Distortion THD+N: 1kHz<0,04%, 20kHz<0,2%
Damping Factor 300 (4)
Power Consumption
Stand By 13 VA
Idle Mode 120 VA
Maximum 800 VA
Line Voltage 230/115Vac, 50/60Hz
Weight 20 kg / 44,44 lbs
Dimensions (W x H x D)
450 x 155 x 400 mm
17.7 x 6.1 x 15.7 inch |
Descrizione:
Si tratta di un
ampli allo stato dell'arte , come scriverebbero alcune importanti
riviste !!! a parte gli scherzi veramente un bell'amplificatore ,
monolito nero con un display a led blu proprio al centro
dell'apparecchio.
Un imballo come
si deve e una copertura in velluto nero
Dal sito
ufficiale:
This new masterpiece from
MBL fulfils the wishes of all the music lovers who want a com-pact and
elegant audio reproduction
system without any compromise in sound quality.
The power section of the
mbl 7008 is designed with a double-mono construction, using 2 separate
power boards. For optimal operation, the heatsink is on the top - this
design cre-ates the shortest signal path and the most homogenous
temperature field for lowest ther-mal distortion. You will be surprised
by the control of the power amplifier stage and you will feel that you
have virtually limitless amounts of power available. The second surprise
will be the total lack of coloration of the unit - what's left is only
the beauty of the music. This is one of the rare amplifier designs where
a solid-state amplifier is able to reproduce ex-tremely difficult
instruments with pure fidelity, without introducing distortion.
The preamplifier section
of the mbl 7008 embodies the latest developments from our design group,
who designed such famous products as the mbl 6010 and mbl 5010. Pure
analog from the input--over the precise volume control potentiometer--to
the output stage guarantees the purest music reproduction without any
digital harshness. The power supply for the preamplifier input stages
are located on the same printed circuit board so as to en-sure the
shortest path to supply the input circuits. You will also find a
separate transformer for low power analog input electronics directly on
the input circuit board. This separation of high current power
transformer and the low-current, highly-precise input supply
trans-former is one of the important factors to ensure the best music
performance. The whole analog section is designed using engineering
ground plane technology - feel the harmonic richness, the wealth of
details and the timbre of every instrument - be impressed. By
eliminating the interface between separate pre- and power amplifiers,
and removing concerns about impedance matching, the MBL integrated
amplifier provides a shorter, purer signal path. You don't need costly
exposed interconnect cables and separate power cords.
The mbl 7008 is, of course,
based on minimal internal wiring. The input stage is plugged directly on
the power stage to ensure the shortest possible signal path. You will
find a good selection of inputs, in total five, including one balanced
input. On the back of the unit, there is space to plug-in one optional
input to customize your integrated amplifier. This option may be a phono
stage or balanced input, etc. A unique “processor/ bypass” input allows
the power amplifier section to be used with a separate surround
processor. This unity gain connection preserves the integrity of the
sig-nal path for uncompromised stereo listening, while taking full
advantage of the power am-plifier stage for surround listening. The MBL
integrated amplifier can also serve as a stand-alone preamplifier for
use with separate power amplifiers should even greater power be required.
Whatever an owner's ambition, the mbl 7008 can be treated from the
outset as either an integrated amplifier with full remote control, or as
a preamplifier with limitless upward potential, or as a pure power amp
with a separate high-grade preamp.
Display and control
circuits are powered independently via a separate power supply and a
separate power transformer in order to eliminate any risk of noise
contamination.
Scheda
fotografica:




Vediamo dietro:


Vediamo dentro:

Il telecomando:

L'imballo:

Come suona:
Sicuramente le due doti principali di questo integrato
sono la facilità di pilotaggio e la pulizia nel suono .
Cristallino e l'aggettivo che si avvicina di più al suono di
questo prodotto , tutto perfetto , pulizia e tutto al suo posto.
Naturalmente il tutto suonato con dolcezza e ariosità.
|