|
Continuous power output at 8 ohms - 20W RMS, dynamic IHF power : 35W
Remote Control : NO remote with this model
Phono input : Input impedance - 47kohms / 100pF
Input sensitivity 1kHz - 2.4mV for 20W
Signal / Noise at 5mV - 75dB
Total Harmonic Distortion [ 20Hz - 20kHz ] - less than 0.04%
RIAA phono accuracy - +/- 0.5dB
- Line level inputs : Input sensitivity - 150mV
Maximum input level > 10V
Signal / Noise - 85dB
Dimensions [ W x D x H ]: 420mm x 91mm x 273mm -:®:- Weight: 5.5kg
The 7020e is based on the 3020i integrated
amplifier. It is rated at 20 watts per channel of steady-state power
with +3 dB of IHF dynamic headroom, meaning that in musical transients
it produces up to 40 watts / channel of dynamic power at 8 or 4 ohms.
The 7020e shares with all NAD amplifiers and receivers a high-current
output stage that, when playing music instead of test tones, delivers
full power to speakers of any impedance. Its combination of dynamic
power, Soft Clipping, and potent output current give the 7020e a
characteristic ability to drive even difficult speakers to unexpectedly
high volume levels.
In addition to its surprisingly powerful speaker-driving ability, the
7020e contains the same quiet and detailed vinyl phono circuitry,
sensitive digital tuning, wide stereo separation, sharp audio-bandpass
filtering, and musically useful tone controls that larger NAD receivers
employ. In particular, the phono stage for vinyl is famously quiet and
transparently detailed.
The 7020e is a no-compromise product, featuring typically high-value
engineering and understated cosmetic design that stands behind every NAD
product.
|
Foto con
l'alimentatore 110 volt |
|
