Naim Nac 62   Nap 110

Pre + finale

  Di cosa si tratta

  Pre + Finale

L'importanza di iscrivervi alla newsletter

  Produttore

  Naim

  Caratteristiche

  40 watt

  Costo

  1.260.000 lire pre - 1350.000 lire finale anno  1988 circa

Dal web sul Nac 62:

Naim Audio NAC 62 Pre-Amp

1991 olive green Naim NAC 62 pre-amp fitted with Naim 323 K series phono boards.  This is a classic British hifi design from the pen of the late Julian Vereker, founder of Naim Audio, and the man whose vision did much to re-vitalize the British hi-fi industry in the 1970's. This particular example is in almost mint condition and has seen only moderate use.

Naim amplifiers are renowned for reliability, industrial strength components and musical performance at the highest level. Part of the Naim philosophy involves providing the cleanest possible signal to the power amplifier, and an important part of achieving this is to separate the power supply from the pre-amp.  

A quotation from Naim on the subject of their pre-amplifiers:

"Its input circuitry must accept the entire output of the source without being overloaded, while the frequency response and level of input signals must be normalised. The signal then needs further conditioning to ensure that the power amplifier is never driven outside its operating parameters.

Exceptional overload capability is maintained over the whole audio bandwidth. All our preamplifiers have a frequency response to within 1dB between 20Hz and 20kHz and offer perfect stability under all working conditions.

There are no switched filters, tone or loudness controls on Naim preamplifiers: design at this level makes them superfluous. They can never improve the quality of the signal, and there is a sharp penalty for their use in terms of loss of musical information.

We house the power supplies for our preamplifiers in separate cases to avoid the degrading effects of magnetic fields and pay very special attention to both earthing and the type of input connector used".

This is an excellent pre-amp for someone wishing to sample a Naim system without breaking the bank to do so. It will work well with any one of the NAP 110, 140 or 250 power amplifiers along with a Naim HiCap power supply. 

NB Please note that Naim preamplifiers always need an external power supply if used with a power amplifier without a supply or a non naim power amp.

Il pre Nac 62

Il finale Nap 110

Home