|
Coppia cavi per
diffusori terminati lunghezza 2,2 mt
Dal sito
ufficiale:
The REVELATION HYBRID (Halogen Free)
 Our
massive single-lead loudspeaker cable The REVELATION HYBRID bridges the
gap between the past where all our conductors were made of pure metals
in all kind of configurations and the new era where other conductor
materials are involved. The first product of this new “hybrid”
generation is The REVELATION HYBRID.
The main idea behind this concept is that a pure metal conductor is a
wonderful collection and compilation of crystals where the inter-crystal
relations are not perfectly arranged.
In our The REVELATION HYBRID the bridging factor between these crystals
is the thick conductive Linear Structured Carbon ® (LSC)
saturated layer covering the centre conductor.
Due to the special properties of this LSC saturated coating, the sonic
improvements are remarkable. Especially the very fine details of a
recording and the spatial information are transmitted without the
slightest harshness.
All metal strands used in The REVELATION HYBRID are of a very high grade
Matched Crystal (MC) OFC with a thick and very dense coating of pure
silver.
The centre conductor is made of 294 single strands each 0.15 mm. in
diameter exhibiting a total cross-section area of 5.20 mm² and a low
resistance of 0.332 Ohm/100 meter.
The LSC saturated layer covering the centre group is extruded under very
high pressure to ensure a good bridging contact.
The total diameter of this combined group is 7.50 mm.
Around this core 16 helically wound conductors are applied. These 16
outer conductors are individually insulated and are standardly wired in
parallel with the centre conductor, giving a single lead cable. Their
being individually insulated however also allows them to be wired
together as a separate signal return. (Versions wired as such and fit
with matching connectors are available either as twin-lead speaker cable
or as single-ended interconnect on special customer demand).
Each of these 16 conductors consists of 42 strands of 0.15 mm. diameter.
These 16 conductors exhibit a combined cross-section area of 11.88 mm²
and a combined resistance of just 0.145 Ohm/100 meter.
The core combined with these 16 conductors in parallel give The
REVELATION HYBRID its very low resistance of 1 Ohm/km.
The outer insulation jacket is made of red HULLIFLEX ® 3, a
mechanically superb insulation material.
The external diameter is 12.5 mm.
In using this product, the advise is to de-insulate the various groups
to solder them all together in one big connector; Our 10.0 mm. Ø cable
entrance diameter Bus type Universal Speaker Connectors are suited.
To obtain the best performance twist the two loudspeaker leads (the plus
and the minus connecting cables) together with 4 - 5 twists/meter.
For those who do not fear some extra work: with our C - 11.3 RCA type
connectors you can produce a superb single-ended interconnect from The
REVELATION HYBRID by using the 16 outer conductors as the shielding.
With The REVELATION HYBRID for the first time in your audio life you
will hear that the reproduction is as it should be and that there is no
need for any change to another loudspeaker cable.
I connettori
doppi a dotazione
REVELATION_HYBRID_-_Haute_Fidelite_Oct_1997.pdf
REVELATION_HYBRID_-_Hi-fi_News_Feb_1993.pdf
REVELATION_HYBRID_-_Stereophile_May_1993.pdf
|
Audiocostruzioni e
punto vendita di : |
 
|
